Enrolling an Administrator
Administrator, is a person who has full access of the fingerprint device,
and have the right to enrolling new employees.
Before enrolling any employee in fingerprint device you should enroll
an Administrator first.
Depending on the authority level, administrator can be classified as
Super Administrator and General Manager. Super Administrator
handles device management and configuration as well enrolling
employees and other administrator (full access). on the other hand
General Manager limited to handle employee enrollment only.
Super Administrators are typically the individuals authorized as the
device's manager for an organization
Enrolling a Super Administrator
1. Press Menu button > Enroll > Manager > Super Admin
2. Select Finger and press OK to register new fingerprint as shown
below or you may press "_" "_" key to enroll "card" or
"password" instead. (please refer to step 5 - 6)
Press OK
Generally device will suggest the next ID number available from the
smallest unused ID . however You may enter your desired ID number using
the numerical keypad keys.
4. Press OK and place the finger onto the "fingerprint capture"
window in device. The device will ask to place same finger three
times. followed by pressing Ok to save the new enrollment.
Note :
• ID number is unique number that is distributed to each employee in
device. The range of ID number is 1-65535. The ID number is unique
and cannot be repeated or reassigned at any later date.
To enroll Proximity card, select "Card", press OK and wave card to
the proximity sensor area of the attendance device. After acquiring
the card number, the Fingerprint device will display card's OEM
numbers as shown in Figure below. Press OK to save changes.
6. you may enroll password by selecting "Password" option, press OK,
you will be required to enter the 4 digits PIN